viernes, 27 de abril de 2012

COMPONENTES DE UN COMPRESOR

COMPRESOR
El compresor cumple la misión de, aspirándolo, comprimir el gas refrigerante  la circulación de este en el circuito frigorífico.
El compresor puede ser de muchos tipos diferentes como se vera mas adelante, pero de momento nos centraremos en el compresor alternativo y con sus partes descritas en la figura siguiente:
Circuito de aire acondicionado
El motor del automóvil a partir del carburante utilizado CREA una potencia que servirá para obtener el movimiento deseado del vehículo.
El compresor CONSUME potencia del motor del automóvil en producir una compresión de un gas refrigerante que servirá para obtener una POTENCIA FRIGORIFICA.
El gas es aspirado por el compresor, formado por un cigüeñal con una polea por donde recibe el movimiento del motor del automóvil; sobre este cigüeñal van unidos por las correspondientes bielas, dos pistones que se mueven en sus respectivos cilindros situados en el cuerpo del compresor.
Sobre estos pistones esta situado el plato de válvulas, donde están dispuestos en cada uno la de admisión y la de descarga. Y en su parte superior una tapa culata que además del conducto de aspiración y el de descarga, tiene unos canales que unen la aspiración con ambos cilindros y el canal de descarga que une la descarga de ambos con el conducto de salida de gas comprimido.
La base se cierra por otra tapa sobre la cual va el aceite lubricante.
Los pistones llevan en algunos casos, un aro de teflón grafitado que no llega a unir dejando una ranura entre puntas por la que puede pasar una parte del gas que se va al carter durante la compresión, disuelve la parte del aceite que junto con el gas pasa a la cámara de compresión durante la aspiración y luego circula por toda la instalación.
Otros tipos de compresor no llevan aro de teflón dejando una tolerancia entre el pistón y el cilindro por donde circula el gas para obtener aceite.

VALVULAS DE ADMISION Y DESCARGA:

Estas válvulas van fijadas en las placas que separan los cilindros o cámaras de compresión y las cámaras de llegada o salida del compresor.

Circuito de aire acondicionado
a: Pistón en el centro muerto superior
b: Válvula de succión abierta
c: Pistón en el centro muerto inferior
d: Válvula de descarga abierta




COMPRESSORThe compressor meets the mission, inhaling, compress the refrigerant and print circulation is in the cooling circuit.The compressor can be many different types as seen later, but for now we will focus on reciprocating compressor and parts described in the following figure:The car's engine from the fuel used to power CREA serve to obtain the desired motion of the vehicle.CONSUME compressor motor power the car to produce a compression of a refrigerant gas will be used to obtain a cooling efficiency.The gas is sucked by the compressor, comprising a crankshaft with a pulley which receives movement of the automobile engine; on the crankshaft are joined by respective connecting rods, two pistons moving in their respective cylinders located in the compressor body .About these pistons is located the valve plate, which are arranged in each of admission and discharge. In its upper part also a cylinder head cover of the suction pipe and the discharge, has a suction channel joining with both cylinders and the discharge channel which connects the discharge of both with the outlet conduit of compressed gas.The base is closed by another lid on which there is lubricating oil.The pistons are in some cases, a graphitized Teflon ring which fails to join between ends leaving a slot through which can pass a part of the gas going to the crankcase during compression of the oil dissolved together with the gas passed to the compression chamber during the suction and then circle around the building.Other types of compressor are not leaving a Teflon ring tolerance between the piston and cylinder through which gas flows to obtain oil.ADMISSION AND DISCHARGE VALVES:These valves are fixed on the plates that separate the cylinders or compression chambers and chambers of arrival or departure of the compressor.to: Piston at top dead centerb: suction valve openc: Piston at bottom dead centerd: open discharge valve








jueves, 12 de abril de 2012

SEGURIDAD E HIGIENE INDUSTRAL


I.  seguridad e higiene industrial



1.  MANTÉN LIMPIO Y ORDENADO TU PUESTO DE TRABAJO.

2.  NO DEJES MATERIALES ALREDEDOR DE LAS MÁQUINAS.
COLÓCALOS EN LUGAR SEGURO Y DONDE NO ESTORBEN
EL PASO.

3.  RECOGE LAS TABLAS CON CLAVOS, RECORTES DE CHAPA
Y
CUALQUIER OTRO OBJETO QUE PUEDA CAUSAR UN
ACCIDENTE.

4.  GUARDA ORDENADAMENTE LOS MATERIALES Y
HERRAMIENTAS.
NO LOS DEJES EN LUGARES INSEGUROS.

5.  NO OBSTRUYAS LOS PASILLOS, ESCALERAS, PUERTAS O
SALIDAS DE EMERGENCIA.



I.  EL ORDEN Y LA VIGILANCIA DAN SEGURIDAD AL
TRABAJO. COLABORA EN CONSEGUIRLO.

II.  CORRIGE O DA AVISO DE LAS CONDICIONES
PELIGROSAS E INSEGURAS
.
III.  NO USES MÁQUINAS O VEHÍCULOS SIN ESTAR
AUTORIZADO PARA ELLO.

IV.  USA LAS HERRAMIENTAS APROPIADAS Y CUIDA DE
SU CONSERVACIÓN. AL TERMINAR EL
TRABAJO DÉJALAS EN EL SITIO ADECUADO.

V.  UTILIZA, EN CADA PASO, LAS PRENDAS DE
PROTECCIÓN ESTABLECIDAS. MANTENLAS EN
BUEN ESTADO.











I. industrial hygiene and safety



1. KEEP CLEAN AND ORDERED YOUR JOB.

2. MATERIALS AROUND DO NOT LET THE MACHINES.
Place them on SAFE AND NON interfere
EL PASO.

3. PICK THE TABLES WITH NAIL PLATE CUTTINGS
and
OTHER OBJECTS THAT MAY CAUSE
ACCIDENT.

4. MATERIALS AND neatly stores
TOOLS.
Do not let them in unsafe places.

5. Do not block hallways, stairwells, DOORS OR
EMERGENCY EXITS.


I. ORDER AND SAFETY OVERSIGHT DAN
WORK. GET INVOLVED IN.

II. FIX OR DA NOTICE OF TERMS
DANGEROUS AND UNSAFE
.
III. DO NOT USE EQUIPMENT OR VEHICLE WITHOUT
Authorized.

IV. USA APPROPRIATE TOOLS AND TAKE CARE OF
CONSERVATION. After completing this
WORKING leave them in the right place.

V. USED ​​IN EVERY WAY, THE CLOTHES
SET PROTECTION. keep them in
GOOD CONDITION.










miércoles, 4 de abril de 2012

TIPOS DE COMPRESORES

COMPRESORES   ROTATIVOS:




Los compresores rotativos pueden tener dos mecanismos de acción, con paletas o de excéntrica, también llamados de rodillo. En los compresores de paletas y de rodillo, la compresión se produce por la disminución del volumen resultante entre la carcasa y el elemento rotativo, cuyo eje no coincide con el eje de la carcasa (ejes excéntricos). En estos compresores rotativos no son obligatorias válvulas de admisión, ya que como el gas entra de forma incesante en el compresor la pulsación de gas es mínima.



.Rotary compressors may have two mechanisms of action, or eccentric vane, also called roll. In compressor vane and roller, the compression produced by the resultingdecrease in the volume between the housing and the rotatable member, whose axis does not coincide with the axis of the housing (eccentric shafts). In these compressors are not binding rotary intake valves, because as the gas enters the compressor incessantly pressing gas is minimal.




COMPRESOR RECÍPROCOS :




El compresor reciprocante, también denominado recíproco, alternativo o de desplazamiento positivo, es un tipo de compresor de gas que logra comprimir un volumen de gas en un cilindro cerrado, volumen que posteriormente es reducido mediante una acción de desplazamiento mecánico del pistón dentro del cilindro.



The reciprocating compressor, also called reciprocal alternative or positive displacement compressor is a type of compressed gas which achieves a gas volumein a closed cylinder, which is subsequently reduced in volume by the action ofmechanical displacement of the piston within the cylinder.




TIPOS DE EVAPORADOR, CONDENSADOR CONTROL DE FLUJO

TIPOS DE CONDENSADOR:


ENFRIADOR DE AIRE



FUNCIONA  CON LOS PANALES QUE HACEN QUE ENFRÍEN

ORKS WITH THAT MAKE COMBS cool





ENRIADOR DE HIELO:


     
 EL ENFRIADOR DE HIELO LO QUE HACE QUE HAGA HIELO SON LOS TUBOS DE EVAPORADOR


ICE COOLER THAN WHAT IT DOES IS MAKE ICE TUBE EVAPORADOR







TIPOS DE EVAPORADORES:



EL EVAPORADOR VA EN LA PARTE DE FRENTE Y SE ENCARGA DE EVAPORAR Y MANDAR AIRE FRIÓ


EVAPORATOR THE VA ON THE FRONT AND IS IN CHARGE OF COLD AIRevaporate and MANDAR



CONTROL DE FLUJO:

     

EL CONTROL DE FLUJO SE ENCARGA DE CONTROLAR EL PASO DE REFRIGERANTE A GRAN PRECION


FLOW CONTROL IN CHARGE OF REFRIGERANT CONTROL LARGE STEPprecise toleran ce



HISTORIA DE LA REFRIGERACION


¨La refrigeración contribuye a elevar el nivel de vida de las personas de todos los países. Los avances realizados en la refrigeración en años siguientes son el resultado de una labor de conjunto, en la cual los técnicos, el personal realizado, los ingenieros, científicos y otras personas, han aportado sus habilidades y conocimientos.
        Los fundamentos sobre los cuales se construyen nuevas sustancias y materiales, son proporcionados por la ciencia. Este conocimiento se aplica al campo de la refrigeración por quienes diseñan, fabrican, instalan y mantienen el equipo de refrigeración. Después se ha hecho útil atreves de la investigación  planificada subsecuente, el desarrollo y la aplicación práctica.
        La aplicación del principio de la refrigeración no tiene a límites. El ejemplo mas común y el que se reconoce fácil mente es en la conservación de los alimentos. Casi todos los productos que se encuentran en la casa, la granja, el comercio, la industria o en los laboratorios están afectados en cierto modo por la refrigeración se a echo indispensable en la vida moderna.

Breve bosquejo histórico del frio ¨producido por el hombre¨
        La historia del hielo data de épocas tan remotas como los registros históricos. Si bien el hombre de las cavernas de la edad de piedra supo lo que  era el hielo, no tenia idea sobre el uso del  mismo para preservar los alimentos. Miles de años después, los chinos aprendieron que el hielo mejoraba el sabor de las bebidas. Entonces, cortaron hielo en el invierno, lo empacaban con paja y lo vendían durante el verano.
        Los antiguos egipcios descubrieron que podían enfriar el agua depositándola en cantaros porosos colocados sobre los techos de las viviendas a la apuesta del sol. Las brisas de la noche evaporaban la humedad que se filtraba ha trabes de  las paredes del cántaro, enfriando el agua contenida en este. Los griegos y los romanos transportaban nieve de las cumbres de las montañas hasta unos fosos cónicos que recubrían con paja y ramas, después cubrían con un techo de paja. Con el progreso de la civilización la gente hapredio como enfriar las bebidas y los alimentos para disfrutarlos mejor. Este conocimiento aumento el uso del  hielo y la nieve.

Primeros experimentos en la conservación de los alimentos.
            Algunos de los primeros experimentos que quedaron registrados sobre la conservación de los alimentos se remota hasta 1626, cuando Francis Bacón intento conservar un pollo rellenándolo con nieve. En 1683 Antón Van leeuwenhock puso al descubierto todo un mundo científico. Este holandés invento un microscopio y descubrió que un cristal transparente de agua tiene millones de microorganismos vivos. Actualmente este se conoce como microbios. Los científicos estudiaron estos microbios y encontraron que tenia lugar su rápida multiplicación en condiciones de calor y humedad, como las que proporcionan los materiales alimenticios. Esta multiplicación de los microbios pronto se reconoció como la principal de los elementos, en contraste, a temperaturas de 50°F ( 10°C ) o menores, los mismos tipos de microbios no se multiplicaban en absoluto. Por medio de estos estudios científicos se izo evidente que los alimentos frescos podrán preservarse a una temperatura de 10°C o menores. Entonces era posible conservar los alimentos deshidratándolos, ahumándolos, salándolos o mediante el enfriamiento.
               Como había pocos conocimientos sobre la manera de producir temperaturas suficientes bajas para congelar el agua, el hielo se transportaba desde sus fuentes naturales a bordo de embarcaciones asta las principales ciudades del mundo.

Experimentos con maquinas para hacer hielo.
               Una de las primeras patentes (1834) para una maquina practica para hacer hielo fue la que se otorgo ha Jacob Perkins, un ingeniero norteamericano que radiaba en Londres. Estas maquinas se utilizaron exitosamente en plantas empacadoras de carne. En el transcurso de 50 años se produjeron maquinas de hielo en E.U.A, Francia y Alemania. En este periodo se solicitaron registros de alrededor de 3 mil patentes sobre el sistema de refrigeración en E.U.A.
               Mientras se hacían progresos en la producción de hielo por medios artificiales, casi todo el mundo prefería el hielo natural, creyendo que el hielo artificial era insalubre.
               Con el tiempo se venció esta superstición porque: El hielo artificial ce producía usando agua mas pura que la que se encuentra usualmente en lagos y lagunas; podía fabricarse cuando se necesitara; y no era necesario almacenarlo durante largos periodos de tiempo. Por lo tanto, para fines del siglo XIX, el hielo y la refrigeración se convirtieron en objetos comunes en el hogar norteamericano.
            Un factor que contribuyo grandemente al desarrollo adicional del equipo confiable de refrigeración fue la disponibilidad de energía eléctrica barata y el desarrollo del motor eléctrico pequeño. Paralelamente a estos avances, los científicos mantuvieron una investigación constante sobre las verdades con la causa y el efecto de las cuales  de prende casi todo el proceso de la refrigeración.¨


Libro: principios de la refrigeración.
Autores: R. Warren Marsh  y  C. Tomas Olivo








TRADUCCIÓN:


 The cooling helps to raise the living standards of people of all countries. Advances in refrigeration in subsequent years are the result of joint work in which the technicians, the staff made, engineers, scientists and others have contributed their skills and knowledge.
        
The grounds on which the construction of new substances and materials are provided by science. This knowledge is applied to the field of refrigeration by those who design, manufacture, install and maintain refrigeration equipment. 
After it has become useful dare planned subsequent research, development and practical application.
        
Applying the principle of cooling does not have limits. The example most common and easily recognized that mind is in food preservation. Almost all products are in the house, farm, trade, industry or in laboratories are affected somewhat by cooling is essential to echo in modern life.
Brief historical sketch of the cold produced by man ¨ ¨
        
The history of ice ages dating as far back as historical records. While the caveman from the stone age knew what it was ice, I had no idea about the use of it to preserve food. Thousands of years later, the Chinese learned that the ice improved the taste of beverages. 
Then, cut ice in the winter, packed with straw and sold during the summer.
        
The ancient Egyptians discovered that they could cool the water depositing in porous jars placed on the roofs of houses to bet the sun. The breezes of the night evaporate the moisture that has seeped girders pitcher walls, cooling the water contained therein. The Greeks and Romans transported snow from mountain peaks to a conical pits that covered with straw and branches, then covered with a thatched roof. With the progress of civilization people hapredio as cool drinks and food to enjoy better. This knowledge will increase the use of ice and snow.
First experiments in food preservation.
            
Some early experiments were recorded on the conservation of food goes back to 1626, when Francis Bacon attempted to keep a chicken filling it with snow.In 1683 Anton Van leeuwenhock uncovered an entire scientific world. The Dutch invented a microscope and discovered that a crystal clear water has millions of living organisms. Today this is known as microbes. The scientists studied these microbes and found that he had held his rapid multiplication in the heat and humidity, such as providing food materials. This multiplication of microbes soon recognized as the main elements, in contrast, at temperatures of 50 ° F (10 ° C) or lower, the same types of microbes multiplied at all. Through these scientific studies were hoisted clear that fresh food can be preserved at a temperature of 10 ° C or less. 
Then it was possible to preserve food dehydrating, by smoking, salting or by cooling.
               
As he had little knowledge on how to produce temperatures low enough to freeze the water, the ice was transported from their natural sources on boats till the main cities.
Experiments with machines for making ice.
               
One of the first patent (1834) for a machine for making ice was practiced which has awarded Jacob Perkins, an American engineer who radiated in London.These machines were used successfully in meatpacking plants. During 50 years there were ice machines in the United States, France and Germany. 
During this period we requested records from about 3 000 patents on the cooling system in the United States
               
While making progress in the production of ice by artificial means, most people preferred the natural ice, believing the artificial ice was unsafe.
               
With time expired this superstition because: ce artificial ice produced using water more pure than that usually found in lakes and ponds, could be made when needed, and it was not necessary to store for long periods of time. 
Therefore, to the late nineteenth century, ice and refrigeration became common objects in the American home.
            
One factor that contributed greatly to the further development of reliable refrigeration equipment was the availability of cheap electric power and the development of small electric motor. Parallel to these advances, scientists kept constant research on the truths to the cause and effect of which comprises most of the cooling process. ¨Book: Principles of refrigeration.Authors: R. Warren Marsh and C. Tomas Olivo